PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Model RFF-103
Built-In Remote Milk & Ice Cream Dispensers
RFF
Short Form
Specifications
The exterior sides and top edge are
20-gauge galvanized steel. Exterior
bottom is 14-gauge galvanized steel.
Interior has two separate compart-
ments, one refrigerated and on freez-
er. Inner liners are water tight and
constructed of 22-gauge stainless
steel with 1.25” (3.2cm) I.P.S. drain.
Openings have throat liners con-
structed of high impact plastic. Unit is
insulated with foamed-in-place poly-
urethane insulation with a non-con-
ductive top breaker strip.
Each opening has an insulated, stain-
less steel folding lid with high impact
plastic liner, molded rubber edge and
black plastic handles.
Each self-leveling mechanism is field
adjustable by adding or removing
stainless steel extension springs in
the elevator housing inside the
unit. The elevators are connected
by removable platform carriers con-
structed of 18-gauge stainless steel.
Six anodized aluminum divider trays
will be supplied per opening (NOTE:
See chart on back for storage capacity.
Refrigeration system (provide by oth-
ers uses HFC-404A refrigerant. A cop-
per tubing connection to the remote
refrigeration system and two expan-
sion valves are provided. And EPR
valve to regulate refrigerated section
is provided.
NOTE: Temperature controls and
freezer section pressure control are
not provided on remote models.
Optional Accessories and
Modifications:
• Lid locking device
• Wire baskets
• Lexan® lids (refrigerated compart-
ment only)
