Delfi DelfiScan M80, Programming Manual, Page: 15 / 165

DELFISCAN M80
8
3 CONFIGURATION
3.1 CONFIGURATION METHODS
3.1.1 Reading Configuration Barcodes
This manual can be used for complete setup and configuration of your reader by following
the setup procedures in this chapter.
If you wish to change the default settings, this manual provides complete configuration of
your reader in an easy way.
To configure your reader:
1. Open the folded page in Appendix C with the hex-numeric table and keep it open
during the device configuration.
2. Read the Enter Configuration code ONCE, available at the top of each page of
configuration.
3. Modify the desired parameters in one or more sections following the procedures
given for each group.
4. Read the Exit and Save Configuration code ONCE, available at the top of each page
of configuration.
Reference notes describing the operation of the more complex parameters are given in
chapter 4.
3.1.2 Aladdin™
Aladdin™ is a multi-platform utility program that allows device configuration using a PC. It
provides RS-232 interface configuration as well as configuration barcode printing.
3.1.3 Copy Command
A previously configured device (Master), can be used to send its configuration directly to
other devices of the same type (Slaves). The particular procedure for each device is given.