manualshive.com logo in svg

Delem DA-65W, Reference Manual

Share
Download
Delem DA-65W Reference Manual Download Page 76

V0606, 5.6

5.2.

Directories

Bend programs on the control can be stored in different directories. The active local directory 
name is displayed in the header.
When the function key ‘local directory’ has been pressed in the product menu, a new window 
appears with an overview of directories on the control.

5.f

Function keys:

make subdir

Add a new subdirectory. The name of the subdirectory can 
be any alpha numeric string of maximal 8 characters. 
(Avoid the use of slashes ‘/’).

remove sub-
dir

Delete a subdirectory. If the subdirectory is not empty, the 
control returns the message ‘UNABLE TO REMOVE 
DIRECTORY’. An empty subdirectory is deleted without 
warning. The default directory “PRODUCTS” can also be 
deleted. When all the subdirectories have been removed 
the control creates automatically the default directory

select

To select the directory on which the cursor is placed.

Summary of Contents for DA-65W























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands