Installation
DeLaval swinging cow brush SCB3
1 General
Electrical installation must be performed by an
authorized electrician.
Due to the weight of the brush, it is strongly rec-
ommended to perform the installation by
2 - 3 persons.
A hook is pre-mounted on the brush to facilitate
lifting the brush with an elevator or similar. The
hook is placed on the top of the mounting frame.
For two or three persons working together, using
a ladder and a rope, the installation takes approx-
imately 1.5 hours (assuming electricity connec-
tion is available).
Note! Make sure the electrical connection fulfills
general and local requirements and that it is
within reach from the brush.
After the installation, check that the DeLaval
swinging cow brush SCB3 runs smoothly. If not,
switch off the mains connection immediately.
Note! The cow brush is not watertight and should
be used indoors or under well protected roofs
only.
Outdoor installation can cause electrical short-
cuts.
DeLaval swinging cow brush SCB3
Installation
© DeLaval 2016.
2016-07-19, Version 5
14 (26)
84948801