Manual
Article No.: 843025
5
5. RJ45 assignment
1.
WHT/ORG
Data 1 +
3.
WHT/GRN
Data 2 +
5.
WHT/BLU
N/C
7.
WHT/BRN
Data 1 COM
8.
BRN
Data 2 COM
6. Touch-Remote
Operation:
2x AAA Batterien (excl.)
Frequency:
2,4 GHz
Distance:
ca. 20 m (inside)
Dimension (LxWxH):
110 x 52 x 20 mm
On/Off Switch:
addressing with “ON”
Touch Wheel:
RGB
Program Button “P”:
Change the program
Speed Button “S”:
Speed control
Dim Button “B”:
Brightness
White Button „W“:
White Dimmer
1.
Connect Touch-Controller with RF Controller
a.
Switch on the Power of the RF Controller and then push and hold the “ON” button on
the Touch-Controller, after that the connected lamp flashes up 3 times, then the Touch-
Controller and the Controller are connected.
b.
If this step isn’t working please try again.
2.
Disconnect Touch-Controller from RF Controller
a.
Switch on the Power of the RF Controller and then push and hold the “ON” button on
the Touch-Controller till the connected lamp flashes up 9 times, then the Touch-Controller
and the RF Controller are disconnected.
b.
Now you can address the RF Controller again with the same or another Touch-
Controller.
RJ 45
1 - WHT/ORG Data 1 +
3 - WHT/GRN Data 2 +
5 WHT/BLU N/C
7 - WHT/BRN Data 1 COM
8 - BRN
Data 2 COM
1
3
5
7
8
