Page 18
935 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 46360-5672
TEL.: 219-861-0661 - FAX: 219-861-0662 - TOLL-FREE: 888-925-5444
www.dekkervacuum.com
Faults and Fault Log
If a fault occurs the fault will be displayed on the screen and recorded in the fault log. Faults include
Overload, Temperature and in some versions of firmware Back Pressure. The Temperature and Back
Pressure faults are adjustable from the setpoint screen, but it is not recommended to change these
without consulting with a Dekker Technician. Changing these values could result in pump damage.
Below is what is shown on the screen when a temperature fault occurs. The Run Status light will also
turn red and flash so you can see a fault has occurred from a distance. Faults are cleared using the Reset
button, but will not clear until the condition that caused the fault is cleared.
RESET
RUN STATUS LIGHT
