9
REPLACING THE LED DRIVER
(For models with light kit)
REPLACING THE LED LIGHT PLATE
(For models with light kit)
NOTE:
Always turn OFF the power at
the mains switch before attempting to
replace the LED driver.
NOTE:
LED Driver shall only be
replaced by a licensed electrician.
Loosen the screw (A) to lift the top
housing (B). Replace the LED driver
by unplugging the connectors (C, D).
Reposition the top housing and secure
it on the down rod by screw (A).
NOTE:
The light source contained in this luminaire shall only be replaced by a licensed
electrician.
NOTE:
Always turn OFF the power at the mains switch before attempting to replace the
LED LIGHT.
1. Remove the lamp shade by rotating it anti clockwise. Fig 7.
2. Remove the light cover by loosening the 2 screws. Fig 8.
3. Unplug the male and female plugs, then remove the 2 screws holding plate to the fan
and now the LED light kit will be free. Fig 9.
4. Replace the LED light kit and reinstall the plate back to the fan, replug the male and
female plugs together and reinstall the light cover back to the fan.
5. Reinstall the lamp shade to the fan firmly by rotating it clockwise.
Fig 7.
Fig 8.
Fig 9.
9
