7
WIRING DIAGRAM: WHEN USING REMOTE CONTROL
(Remote sold separately)
A single-pole switch must be placed in the same room as the fan as per
local wiring regulations AS/NZ 3000:2018. Please follow the below wiring
instructions before installation of remote kit. A remote kit does not substitute
for a terminal switch and doing so will void warranty.
1/ Remote receiver installation.
FINISHING
THE INSTALLATION
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside
the canopy and that the wires are not damaged during this step. Secure the canopy to
the mounting bracket using the screws provided. Do not overtighten the screws as this
will misalign the canopy potentially causing sounds. For best results leave screws about
4-5mm from mounting bracket and position canopy into key lock slot.
7
