www.dejero.com
!
20
|
LIVE+ GoBox User Guide
!
•
To delete a saved profile from the network, press the
Forget
button.
Type a Wi-Fi password
When connecting to a Wi-Fi network for the first time, you need to provide the Wi-Fi password.
The GoBox saves the network password and reconnects to the network automatically when it
becomes available. If the network does not have a saved profile, you are prompted to type the
Wi-Fi password.
1. Use the arrow buttons to navigate the keyboard on the screen to type the password.
2. Press the
Select
touchpad button after each character.
3. When you finish entering the password, press the
Apply
touchpad button.
Transmitting live
Connect to cellular networks automatically
When the transmitter is on, it automatically detects all available cellular
connections.
When the GoBox connects successfully, each of the individual card transmission
meters show the network name and the signal strength. Each modem connection
shows the network type (such as HSPA, LTE, UMTS). A received signal strength
indicator (RSSI) value also appears to show approximate strength of the
connection. After you press Play for a live broadcast, the grey dot changes to
green.
Start a transmission
After you connect your camera to the transmitter, you can start a transmission.
1. Verify that the Device Ready message appears on the Display Ready screen.
2. Press the
Play
touchpad button.
You can monitor the video feed as it is transmitted. ON AIR appears on the Preview screen
when you are operating in LIVE mode.
Note
: If the Preview screen is black, check that your camera is on and connected.
Verify that you are sending supported video format to the GoBox.
Stop a transmission
1. To stop a transmission, on the Device Ready screen, press the
Stop
touchpad button.
The Preview screen continues to show the input from the camera, but Preview appears in the
upper right corner of the window. The device remains ready to resume broadcasting. Press the
Play
touchpad button to resume the transmission.
