INFO
Remember to
Write
when you have finished editing the input/output configuration.
7.7.3 Configure function(s)
AI
AO
PWM
DI
DO
Configurable for:
●
●
●
●
●
Analogue input (AI) functions
You can select multiple functions for an analogue input (AI). However, all the selected functions must have the same units.
INFO
The selected function(s) can be either analogue input function(s) (
Analogue functions
), or digital input function(s)
(
Supervised binary input
).
Analogue output (AO) / Pulse width modulation (PWM) function
INFO
The function must be selected before the
Output setup
can be configured.
You can only select one function for an analogue output (AO) or pulse width modulation (PWM).
Digital input (DI) functions
You can select multiple functions for a digital input (DI).
Digital output (DO) function
You can only select one function or alarm for a digital output (DO).
Select function
1. Select the required function(s) from the available list.
2. Select:
•
Save
to store the function(s).
•
Clear
to clear all selected function(s).
INFO
Remember to
Write
when you have finished editing the input/output configuration.
7.7.4 Configure the relay setup
AI
AO
PWM
DI
DO
Configurable for:
●
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 95 of 213
