DPS-1 Installation and operation instructions 4189360002 Rev. C
Package content, tools and handling
Page 6 of 14
3.
Package content, tools and handling
3.1
Package content
3.1.1 Standard package content:
Quantity Description
1
DPS-1 power supply
3.2
Required tools and accessories
The following required tools and accessories are not delivered with the DPS-1.
Table 1
Required tools and accessories
Tool or accessory
Torque
Used to
Flat Screwdriver 3 mm wide
N/A
Connect / disconnect wires.
Wire insulation stripping tool
N/A
Strip wires insulation
Press tool for ferrules
N/A
Press ferrules on wires.
Ferrules (recommended)
N/A
Terminate wires to connectors
(recommended, different size
according to wire size).
Appropriate screwdriver for the
selected 4 mm mounting screws.
Optional, needed if chassis
mounting is selected.
According to
screws spec.
Fastening screws (M4).
4 pcs M4 screws
Optional, needed if chassis
mounting is selected.
According to
screws spec.
Fasten the DPS-1 to the cabinet.
Length depends on the cabinet
structure.
4 pcs self-locking nut
Optional, needed if chassis
mounting is selected.
According to
screws spec.
Fasten the DPS-1 to the cabinet.
3.3
Handling
Attention
