© 2000 Directed Electronics, Inc. Vista, CA
5
primary harness (H1) wire connection guide
This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon as the system
is disarmed. The orange wire can be used to control an optional starter kill relay or a DEI 8617.
NOTE:
If connecting the orange wire to control another module, such as a 529T or 530T window
controller, a 1 amp diode (type 1N4004) will be required. Insert the diode as shown below.
IMPORTANT!
Never interrupt any wire other than the starter wire.
This wire should be connected to the (+) parking light wire. This output is protected with a 10 amp fuse. Never
increase the value of the light flash fuse. If more current is required, use an external relay.
H1/2 WHITE (+) light flash output
H1/1 ORANGE (-) ground-when-armed output
