6
©
1999 Directed Electronics, Inc.
Using Your System
Pressing
for one second will lock the doors. The red LED will
begin to flash once per second. If connected, the vehicle's horn
will honk and the parking lights will flash once to confirm locking
of the doors. If the ignition is turned on while the vehicle is
locked/armed, the horn will honk and the parking lights will flash
(if connected).
NOTE:
You must use your remote transmitter to lock the vehicle in order
for the system to be armed. Manually locking the vehicle does not arm
the system; it will only lock the doors. If you have not used the remote
transmitter to lock the vehicle doors (i.e. the vehicle has been locked using
the lock/unlock switch) the transmitter cannot be used to unlock the doors.
If the optional starter kill relay is installed, the system can be pro-
grammed to arm the Failsafe
®
Starter Kill relay automatically
(called
passive mode
). If the system is programmed for passive
mode, it will automatically activate the Failsafe
®
Starter Kill relay
30 seconds after the ignition is turned off. Passive mode is indi-
cated by rapid flashing of the LED after the key is turned off.
NOTE:
For passive mode to be effective, the optional Failsafe
®
Starter Kill
relay must be installed.
If passive mode is programmed on, it is also possible to program
the system to lock the doors automatically. This is called
passive
locking
. If passive locking is turned on, care must be taken to pre-
vent the keys from being locked in the vehicle.
Locking/Arming
