14
1
2
3
4
5
6
1
3
1
2
3
2
4
4
1
1
4
4
6
4
4
5
2
1
3
3
1
2
2
3.3.3 Assembly
To assemble the variable tripod, loosen the two outer
M8
hexagon locking nuts and remove them
from the tripod together with the two hammer-head screws
M8
x 20. Loosen the inner
M8
hexagon lock nut on both hinged feet. Fold the two feet to the outside and screw them together
again by means of the
M8
hexagon lock nuts and the hammer-head screws. To this end, observe
the relevant tightening torques (see Fig. 3.3.3).
Outer
M8
hexagon lock nut
Hammer-head screw
M8
x 20
Inner
M8
hexagon lock nut
Stainless steel foot, L = 298.5 mm
Stainless steel foot, L = 320 mm
Hammer-head screw
M8
x 20 (pre-mounted;
check tightening torque!)
Fig. 3.3.3
Variable tripod
Observe a tightening
torque of 15 Nm!
