alle SPD's
programmiert
?
!
press in
Further SPDs to
be programmed?
Automatic status determination
at the end of the programming process.
Monitoring status
Master
Slave
Note:
A module can only be reset to its initial condition via the DRC LC M3+ test device or the DRC MCM XT
and the ”Status D Service Console” software! Already programmed modules cannot be reset via the
DRC MCM!
In case of multiple application one
DRC MCM has to be switched into the
Master mode to start monitoring!
no
yes
to
page 8
Continued from 5.3
Attach
number label
for programmed password
(bus/MCM adress • position number)!
press in
Quick Start Guide DEHNrecord
DRC MCM XT
page 9
click
