A
+/-
B
-/+
+/-
A
-/+
B
check
!
!
push
ser
vice
min. 2 sec.
Observe progress bar and hints, wait until the result
is displayed.
Quit
Service
Console!
Busaddress
of the
DRC MCM XT
Results
display
SPD
No.
Select
command
1. Select command
"Program individual SPD for DRC MCM XT"
2. Select SPD
"SPD <No.>"
3. Send command
Hints
Progress
bar
After selecting the bus address of the DRC MCM XT and
indication of a positive result:
Start Service Console at the
DRC MCM XT Status Display
Observe hints!
Insert
next SPD
from the outside
to the inside!
Initial condition during start-up
Faulty SPD is removed for maintenance
Always insert
only
one
unprogrammed
SPD for programming! stecken!
Do not insert it completely!
see figures
5.2 Programming via PC using the "Status Display and Service Console" software
Start Service mode at the
DRC MCM XT
Quick Start Guide DEHNrecord
DRC MCM XT
page 6
see page 7
continued from page 7
Service functions
System description
start Service Console
