background image

21 / EN

Washing Machine / User’s Manual

Problem

Reason

Solution

Programme time does not 

countdown. (*)

There might be unbalanced load in the machine.

 

Š

Automatic unbalanced load detection system 
might be activated due to the unbalanced 
distribution of the laundry in the drum.

Machine does not switch to 

spinning step. (*)

There might be unbalanced load in the machine.

 

Š

Automatic unbalanced load detection system 
might be activated due to the unbalanced 
distribution of the laundry in the drum.

The machine will not spin if water is not drained 

completely.

 

Š

Check the filter and the draining hose.

Excessive foam might have occurred and automatic 

foam absorption system might have been activated 

due to too much detergent usage.

 

Š

 Use recommended amount of detergent.

Washing performance is poor: 

Laundry turns gray. (**)

Insufficient amount of detergent has been used over a 

long period of time.

 

Š

Use the recommended amount of detergent 
appropriate for water hardness and the laundry.

Washing was made at low temperatures for a long 

time. 

 

Š

Select the proper temperature for the laundry to 
be washed.

Insufficient amount of detergent is used with hard 

water.

 

Š

Using insufficient amount of detergent with hard 
water causes the soil to stick on the cloth and 
this turns the cloth into gray in time. It is difficult 
to eliminate graying once it happens. Use the 
recommended amount of detergent appropriate 
for water hardness and the laundry.

Too much detergent is used.

 

Š

Use the recommended amount of detergent 
appropriate for water hardness and the laundry.

Washing performance is poor: 

Stains persist or the laundry is not 

whitened. (**)

Insufficient amount of detergent is used.

 

Š

Use the recommended amount of detergent 
appropriate for water hardness and the laundry.

Excessive laundry was loaded in.

 

Š

Do not load the machine in excess. Load with 
amounts recommended in the "Programme and 
consumption table".

Wrong programme and temperature were selected. 

 

Š

Select the proper programme and temperature for 
the laundry to be washed.

Wrong type of detergent is used.

 

Š

Use original detergent appropriate for the 
machine.

Too much detergent is used.

 

Š

Put the detergent in the correct compartment. Do 
not mix the bleaching agent and the detergent 
with each other.

Washing performance is poor: Oily 

stains appeared on the laundry. (**)

Regular drum cleaning is not applied.

 

Š

Clean the drum regularly. For this, please see 
4.4.2.

Washing performance is poor: 

Clothes smell unpleasantly. (**)

Odours and bacteria layers are formed on the drum as 

a result of continuous washing at lower temperatures 

and/or in short programmes.

 

Š

Leave the detergent drawer as well as the loading 
door of the machine ajar after each washing. 
Thus, a humid environment favorable for bacteria 
cannot occur in the machine.

Colour of the clothes faded. (**)

Excessive laundry was loaded in.

 

Š

Do not load the machine in excess.

Detergent in use is damp. 

 

Š

 Keep detergents closed in an environment free 
of humidity and do not expose them to excessive 
temperatures.

A higher temperature is selected.

 

Š

Select the proper programme and temperature 
according to the type and soiling degree of the 
laundry.

It does not rinse well.

The amount, brand and storage conditions of the 

detergent used are inappropriate.

 

Š

Use a detergent appropriate for the washing 
machine and your laundry. Keep detergents closed 
in an environment free of humidity and do not 
expose them to excessive temperatures.

Detergent is put in the wrong compartment.

 

Š

If detergent is put in the prewash compartment 
although prewash cycle is not selected, machine 
can take this detergent during rinsing or 
softener step. Put the detergent in the correct 
compartment.

Pump filter is clogged.

 

Š

Check the filter.

Drain hose is folded.

 

Š

Check the drain hose.

Summary of Contents for WMY 81443 MLCM




























Reviews: