18 / EN
Washing Machine / User’s Manual
Discharging the water when the machine does not
have an emergency draining hose:
a Place a large container in front of the filter to catch water
from the filter.
b Loosen pump filter (anticlockwise) until water starts to
flow. Fill the flowing water into the container you have
placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
c When the water inside the machine is finished, take out
the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers, if
any, around the pump impeller region.
5 Install the filter.
6 If the filter cap is composed of two pieces, close the filter
cap by pressing on the tab. If it is one piece, seat the tabs
in the lower part into their places first, and then press the
upper part to close.
Indicative values for Synthetics programmes (EN)
Load (kg)
W
ater
Consumption
(l)
Energy
Consumption
(kWh)
Programme
Duration
(min) *
Remaining Moisture
Content (%) **
Remaining Moisture
Content (%) **
≤ 1000 rpm
> 1000 rpm
Synthetics 60
4
71
1.10
01:45
45
40
Synthetics 40
4
68
0.70
01:31
45
40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
Summary of Contents for WMY 81443 MLCM
Page 1: ...2820524090 19 06 14 10 02 Document Number WMY 81443 MLCM ...
Page 26: ......
Page 27: ......
