Page 9
Warning:
Ensure that the cold and
hot water connections are made
correctly when installing the
machine.
Warning:
Do not use water that is
hotter than 50ºC
Warning: The drain hose must be
securely fitted for good water flow
and to avoid risk of flooding or
injury.
The hose should not be twisted,
bent or squeezed shut and must
not be stepped on.
2. Install the water inlet hose.
3. Connect to the power source.
4. Open the water tap.
5. Position the drain hose.
Tilt the machine slightly. Adjust the
adjustable foot of the machine if necessary
to ensure that the machine is level and that
the 4 corners of the machine are making
steady contact with the ground. If the ground
is not flat the surface of the ground must be
addressed. A machine that is not levelled
and is unstable will vibrate and generate
excessive noise.
One inlet hose
Two inlet hoses
Warning:
Water will overflow if the
height of the drain is under 750 mm
Warning:
The drain hose must be
securely fitted for good water flow
and to avoid risk of flooding or
injury.
6. Place clothes with suitable amount of
washing powder
