Page 18
Display
Causes
Solutions
E1
Alarm for abnormal water
intake
Check that the water tap is open or not
E2
Alarm for water drain not
finishing
Check the water level sensor and drain pump
E3
Alarm for lid not closed
before spin
Close the lid
E4
Alarm for washing clumping
on one side
Manually balance clothes in tub with hands
CL
Child lock alarm if the lid is
open
Power off for 5 seconds then restart
F0-F8
Any abnormal occurrence
Power off for 5 seconds then restart.
Call your nearest Defy service agent
Malfunction display and solutions
SINCE THE FOLLOWING ARE NOT
FACTORY FAULTS, THEY ARE THE
OWNER’S RESPONSIBILITY
•
Damage to the exterior finish, breakage of
components, damage through improper
use or installation of the washing machine
or damage caused by moving the washing
machine.
Before calling a Service technician or
your dealer, please check the following:
•
Is the machine plugged into the wall
socket? Is the house circuit breaker on?
•
Is the machine switched on? Has the
washer lid been closed properly?
•
Is the detergent dose correct? Is the filter
clean? Is the tap open?
•
Is there a water supply to the home? Have
any of the hoses been twisted or kinked?
Disposing of the old washing machine
•
This washing machine has been
manufactured with high quality parts and
materials which can be reused and are
suitable for recycling.
•
Do not dispose of the machine with
normal domestic waste at the end of its
service life.
Please consult with your local authorities.
•
Should you at any time in the future
scrap the washing machine, cut the
power cord and take measures to
render the door inoperative thereby
preventing children, when playing,
getting trapped inside.
Things to be done for energy saving
• Always follow the instructions on the
detergent packaging.
• Wash slightly soiled laundry at low
temperatures.
• Use faster programmes for small
quantities of lightly soiled laundry.
Owners Responsibility
Ensure parts and accessories are Installed according to the directions given in this
instruction manual.
The manufacturer strives for continuous improvement. For this reason, technical
specifications, text and illustrations in this manual are subject to change without
notice.
Figures in this manual are schematic and may not match your machine exactly.
