Page 14
1. On / Off button
2. On / Off indicator light
3. Programme selection knob
4. Start / Cancel button
5.Progress indicator lights
6.Salt level indicator light
7.Half load button
The control panel
12
1. Plug the dishwasher into the mains socket.
2. Open the water tap.
3. Open the door and load the dishes.
4. Check that both spray arms move freely.
5. Add detergent and close the
compartment.
6. Close the door.
7. Press the On / Off button to switch the
washer on.
8. Check the salt* and rinse aid** level
indicator lights and if necessary replenish.
9. Using the programme selector knob,
select the desired programme. (see
programme table)
10.
Start the programme by pressing the Start/
Cancel button.
Attention!
Avoid opening the door during the washing
process.
This interrupts the programme and hot steam
will escape.
The programme will continue when the door
is closed once more.
•
When the progress indicator shows
‘Programme End” the programme has
been completed.
•
Press the On/Off button to switch the
washer off.
•
Close the water tap. (Optional).
•
Unplug washer from the mains. (Optional).
•
Open the door and allow15 minutes for the
washer to cool down.
•
Unload the dishes, beginning with the
lower basket.
How to use the dishwasher
13
** You can also tell
whether rinse aid must be
refilled by looking at the
rinse aid dispenser. When
the visual fill indicator is
dark, there is enough
rinse aid in the dispenser.
When the colour is light,
open the dispenser and
refill rinse aid.
* In machines which do not possess a salt
indicator light, the salt content can be read
on the salt. dispenser. When the visual fill
indicator is dark, there is enough salt in the
dispenser. When the colour is light, open the
dispenser and add dishwasher salt.
