18
Remove grate, then ash container using handles, and remove the re-
maining dust. Dust can be removed using vacuum cleaner only if it is
completely cold. Use vacuum cleaner adapted to remove the particles
of a specified size for this purpose.
Picture
33. Removing the grate and an ash container.
Re-install the ash container below the grate after the cleaning,
making sure that its position is correct.
7.1.2.
WINDOW PANEL CLEANING
It is recommended use a dry brush to clean the ceramic glass. If
the contamination is significant use suitable cleaning agent spray and
spray little amount and then clean the window panel with a cloth.
Window panel in the DEFRO HOME INTRA G fireplace insert
should be cleaned when doors are in hinged position. Fireplaces with
front doors are equipped with locks in the upper part of the frame of the
door (figure 35). Fireplaces with side window panel are equipped with
locks on top and bottom of the frame on its left side (figure 36).
Picture 34. Location of locks allowing opening of the doors in hinged position
for DEFRO HOME INTRA G.
Picture 35
.
View of fireplace insert DEFRO HOME INTRA G with
doors in lifted position.
Do not use abrasive products and do not spray the
product for window panel cleaning on painted parts and
gaskets of fireproof doors (cord made of ceramic fiber).
Do not open doors to clean the window panel during
operation of the fireplace. Cleaning of window panel is
possible only when the equipment is cold.
The opening of guillotine doors in the hinged position
should be used rarely, only when it is necessary during
occasional cleaning of window panel or other service
works.
Picture 36
.
Location of locks allowing opening of the doors in hinged position
for DEFRO HOME INTRA BP G.
Picture 37
.
View of fireplace with window panel and guillotine doors in lifted
position.
Picture
38. Location of transoms enabling the opening of side windows
in the lift door in the C version of the DEFRO HOME INTRA C G fire-
place insert.
1
2
