background image

Di 5.5BPS

OWNER’S MANUAL

SAFETY FIRST

When installing your Di 5.5BPS Loudspeakers, be aware of the weight 
of your particular model (see specification page for the weight 
of your model) and the sturdiness of the material into which you are
installing the speaker. Also be aware of any concealed studs, electrical
wiring or plumbing in the wall or ceiling into which you are installing
the speakers. If you are not sure of a safe way to install these speakers,
consult a professional installer, your authorized Definitive Technology
dealer, or a building contractor.

Technical Assistance

It is our pleasure to offer assistance if you have any questions regarding

your Definitive loudspeakers. Please contact your nearest Definitive

Technology dealer or call us directly at (800) 228-7148 (US & Canada), 

01 (410) 363-7148 (all other countries) or e-mail

[email protected].

Service

Service work on your Definitive loudspeakers will normally be performed

by your local Definitive Technology dealer. If your dealer is unable or 

unwilling to perform service contact us for alternative options. Please

note that the address given in this manual is the address of our offices 

only.

Under no circumstances should loudspeakers be shipped

to our offices or returned without contacting us first and

obtaining return authorization.

Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone: (800) 228-7148 (US & Canada),
01 (410) 363-7148 (all other countries)

WARNING: LISTEN CAREFULLY

Definitive Technology loudspeakers and subwoofers are capable of 
playing at extremely high volume levels, which could cause serious or
permanent hearing damage. Definitive Technology accepts no liability
for hearing loss, bodily injury or property damage resulting from the
misuse of its products.

You should limit prolonged exposure to volumes that exceed 
85 decibels (dB).

For more about safe volume levels refer to the Occupational 
Health and Safety Administration (OSHA) guidelines at:
www.osha.gov/dts/osta/otm/noise/standards_more.html.

7

NOTES

Summary of Contents for DI 5.5BPS









Reviews: