9
L
TOOLS
File Load:
Load a .txcal
fi le into the transmitter
File Save:
Save current
settings to a .txcal fi le
History:
See a text fi le history of all transmitters
programmed on this computer
By default, saved fi les will be auto named based on
the current range settings. You may type a custom fi le
name if desired.
M
AUTO
/
REPEAT PROGRAMMING
Once a .txcal fi le has been saved (see step L above), it
can be used to auto program transmitters to the same
settings as follows:
A. Close
TM Setup
program.
B. Attach new TM transmitter to the computer.
C. Double-click on the .txcal fi le.
TM Setup
will auto
start, connect, program the attached transmitter,
and then close again.
Multiple transmitters can be programmed quickly and
effi
ciently in this way by repeating steps B-C.