6
G
INPUT & OUTPUT SETUP
Select your input and out-
put options.
NB: Changing the input
type (ie. from RTD to T
/
C)
will clear the Input Zero
Adjust calibration value,
if applied (see step 10).
Click
Program
to write
the new changes to the
transmitter. (Button will
be bold if changes need to
be written.)
The following dialogue will be displayed during
programming.
When programming is complete, the
Test
and
Wiring
panels will be updated to refl ect the new changes.
Never disconnect the transmitter during programming.
If you do so, the transmitter will be left in an unknown
state and may not operate.
See Appendix A for information on errors & other
dialogues that may appear during programming.
H
TEST
This panel shows the
current input and output
values, and a short
duration trend graph of
the output.