5 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
A
Bulb holders
2
B
Canopy
1
C
Motion sensor
1
MOUNTING LOCATIONS
Ƒ
Determine the mounting location – a wall or under
an eave.
Ƒ
Position bulb holders (A) in the general direction
of the desired light coverage and tighten the lock
nuts (1) and the thumb screws (2).
Ƒ
If needed, lift the motion sensor (C) up and
rotate it so the controls face the ground after
installation. Tighten the clamp screw (3) when
done. Do not overtighten.
NOTE:
If the motion sensor (C) pops out of the ball joint,
loosen the clamp screw (3), push the motion sensor (C)
back into the ball joint, and tighten the clamp screw (3). Do
not overtighten.
Wall Mount
Eave Mount
C
A
A
B
A
A
C
1
1
2
2
3
