DEFENDERTECH DT-200Turbo, Installation And Maintenance Manual

Page: 41 / 50

~ 7 ~
Wall or Ceiling Fixing
instead of the dowel screws and lock the bracket between nut and locknut.
In the case of "Floating" installation (spaced from the ceiling), use 10 mm galvanized steel threaded rods
DT-SP2 accessory.
In case of ceiling installation it is NECESSARY to equip the appliance with the
TANK ARE ALWAYS UNDER THE BURNER
PROVIDED THE ELECTRONIC PART AND THE
For wall installation
IT IS POSSIBLE TO ROTATE THE APPLIANCE
Use 2 dowels (Fischer) of 10 mm of the type suitable for the wall where the machine will be installed.
Position the bracket as shown in the photo at a minimum distance of 15 cm from the ceiling.
support the weight indicated in the technical data sheet.
Make sure that the wall or ceiling chosen for the placement of the machine is suitable to