DEFENDERTECH DT-200Turbo, Installation And Maintenance Manual

Page: 40 / 50

~ 6 ~
"DT-200 Turbo" FOG GENERATOR DATA SHEET
Saturated volume with a 30 seconds shot of fog
25 sq.m h.3 that in the next 2/3 minutes saturates 200 m³
Fog dispensing time Adjustable from 1 - 30 sec
Forced pause time between one shot and another Adjustable 0/5 min.
Total time of possible shots 7 shots of 30 seconds (with full tank)
Heating time
10 - 15 min
Tank capacity
0,5 Lt. (refillable)
Response time 5 Ms
Burner power supply 220 Volt
Electronic Power Supply 12 Volt
Rated power absorbed at the device start-up
500 Watts only for the first 10/15 min.
Power absorbed in stand-by 12V 5mA
Power absorbed during shooting 12V 350mA
Average hourly energy consumption
Only when "Armed" 45w/h
Autonomous 12V power supply stage that can be integrated inside
Yes, “DT-power200" optional
Back-up battery that can be integrated inside Yes, “DT-power200" optional
Burner autonomy in the event of a power failure
At least one 60-second shot can be fired within 1 hour
Fault reporting system
Yes (visual) + 5 wire outputs
No./N.c. Input Nr 1 for heating activation. Nr 1 for firing activation
No./N.c. Output
Nr.5 Battery Status - Failure - Liquid Level - Heating -
Armament on/off on/off
Nozzles available for fog jet orientation 2 models: 1x45 ° adjustable as standard - 1x0 ° optional
Options for nozzle extensions
Front and Rear from 200mm to 500mm (DT-U200P - DT-U500P)
Installation Methods
Wall-Ground (horizontal/vertical)- Ceiling with optional DT-SP2
Weight
8 kg with full tank
Dimensions
L.495 x H.150 x Sp.130 mm
Color Ral9010 White
The manufacturer reserves the right to vary the technical characteristics of the product