Defender SENTINEL 3 Instruction Manual Download Page 10

Page: 10 / 70

SENTINEL 3

3. INSTALLATION

3.1 CAMERA INSTALLATION

Things to consider before you install your cameras

• Camera(s) should be installed between 8 and 13 feet above the area

to be monitored.

• Ensure there are no obstructions in the camera’s view, to maximize

viewing area.

• Ensure that the sunshade is positioned to avoid glare and position

cameras away from direct sunlight.

• Decide whether the camera will be wall-mounted or sit on a desk/table

top. If wall mounting, use the mounting hardware in the package.

• Each camera comes with 60 feet of extension wire. Please make sure

you mount the cameras no more than 60 feet from the DVR.

• We recommend using a surge protected power bar and/or an

Uninterrupted Power Supply (UPS) to power the DVR and

camera system.

Mounting

1. Screw each mounting bracket into each camera’s mounting hole,

turning it clockwise.

2. Mount each camera in the desired location no more than 60 feet from the DVR

unless you have purchased additional wiring. You may wall mount or desk

mount these cameras.

3. Adjust cameras to the desired viewing angles.

Summary of Contents for SENTINEL 3







































































Search results

Summary of Contents for SENTINEL 3

Reviews:

Related manuals for SENTINEL 3

Brands by name

Popular brands

Defender SENTINEL 3, Instruction Manual

Search results

Summary of Contents for SENTINEL 3

Reviews:

Related manuals for SENTINEL 3

Brands by name

Popular brands