2
Quick Start
Quick Start
Connecting to the Probe
using the PosiTector App
PosiTector DPM L
probes are designed to be used with the
PosiTector App
or a
PosiTector Advanced
gage.
Power-up the
PosiTector DPM L
probe by unscrewing the top
cover (counter clockwise), then slide the power switch to the ON
( | ) position. The blue LED will flash once indicating the power is
ON. Replace the top cover.
The probe will begin broadcasting and is now visible to the
PosiTector App
and
PosiTector Advanced
instruments within
10 m (30 feet).
The probe will not begin logging until Logging
Mode
(pg. 5)
is enabled from the PosiTector App or a
PosiTector Advanced
instrument
.
Install the
PosiTector App
from the
App Store (Apple iOS) or Google
Play (Android).
Open the
PosiTector App
. Available
probes will appear as “DPM L” with
the corresponding serial number and
most recent Dew Point temperature
reading, as shown at right. Select the
desired
PosiTector DPM L
probe to
connect.
NOTE:
The last measured Dew Point temperature reading is shown.
To power-down the probe, unscrew the top cover and slide the
power switch to the OFF ( O ) position.
Once
Logging Mode
is enabled, the
PosiTector DPM
L
probe will continue to log readings unattended while discon-
nected from the
PosiTector App
or
PosiTector Advanced
gage.
NOTE:
