DeFelsko PosiTector CMM IS, Instruction Manual

Page: 3 / 64

1
Introduction
The PosiTector CMM IS concrete moisture meter measures the
relative humidity and temperature in concrete slabs using in situ
probes, prior to the application of flooring materials or coatings.
When applying flooring materials or coatings to concrete, it is
critical to ensure that the moisture level inside the concrete has
decreased to acceptable levels. If not, moisture can accumulate
below the flooring or coating, causing discoloration, cupping,
buckling, blistering, adhesive failure and mold growth.
Designed in accordance with ASTM F2170, the PosiTector CMM
IS provides a complete measurement solution for monitoring the
drying process of concrete slabs in compliance with industry
standards. The unique design of the
PosiTector CMM IS probes
allow the user to place them into concrete immediately after the
holes are drilled and leave them in place until they reach
equilibrium, eliminating the need to reopen the hole at a later
date.
PosiTector CMM IS probes broadcast measurements to the
PosiTector App (pg. 9) or PosiTector Advanced instruments
(pg. 11) using Bluetooth wireless technology.
The PosiTector CMM IS is available in 3 kit configurations:
Basic, Complete and Professional .
Basic Kit
CMMISKITB
Complete Kit
CMMISKITC
Professional Kit
CMMISKITP3-E
— — —
l 3 CMM IS probes
l 3 Saturated Salt Solutions
l
3 Calibration Check
Chambers
l 3 Caps
l Extraction Tool
l
Tape Measure
l
Ten A-76/LR-44 batteries
— — —
l 5 CMM IS probes
l 5 Saturated Salt Solutions
l
5 Calibration Check
Chambers
l 5 Caps
l Extraction Tool
l
Tape Measure
l
Vacuum Tool Attachments
l Ten A-76/LR-44 batteries
l Hard shell carrying case
l
PosiTector DPM3
l 5 CMM IS probes
l 5 Saturated Salt Solutions
l
5 Calibration Check
Chambers
l 5 Caps
l Extraction Tool
l
Tape Measure
l
Vacuum Tool Attachments
l Ten A-76/LR-44 batteries
l Hard shell carrying case