www.defa.com
4
Off
Off
Off
Off
Off
Off
Off
Off
10%
Off
Off
Off
100%
100%
100%
100%
1
Radar activation - example 2:
Grouped responses. Connected fittings respond either by turning ON to the Max level or by turning ON to the
selected Standby/Min level. MinMaxOff mode.
- All fittings in the installation are OFF by default.
- The first connected fitting to detect motion sends
an activation signal and turns on to the Max level.
- Fittings on the same floor respond to the
activation signal in the same way.
- The first fitting on the floors above and below
respond by turning ON to the selected Standby/
Min level, and the Standby Period starts running.
Off
Off
Off
Off
100%
100%
100%
100%
10%
Off
Off
Off
100%
100%
100%
100%
2
- A person moving to the second floor is detected
by the first fitting, already at the Standby Min level.
- The fitting goes from the selected Min level to
100% and sends an activation signal.
- Fittings on the second floor respond by also
turning ON to the Max level.
- The stairwell fitting in the third floor responds by
turning ON to the selected Standby level.
- The fittings in the first floor remain at the Max level
for the duration of the Hold Period.
- Note that when the fittings in the first floor are not
already on (e.g. the person is leaving from the
second floor), the stairwell fitting on the first floor
will also respond by turning ON to the selected
Min level.
RF Radar | MinMaxOff
