27
English
www.defa.com
4. System requirements/limitations
• Only one homeCLU per main fuse
• Minimum 6A must be available for each charge point.
• Maximum main inlet fuse size: 4x63A
• homeCLU safety margin for the system in total is 10%
• Maximum 6 charge points for three-phase charging
• Maximum 2 charge points for single-phase charging on the same phase(s)
• Maximum 6 charge points for single-phase charging with phase rotation in three-phase
network
• Compliant with charge controllers from ABL with firmware 2.7C/CD, 2.8C/CD or newer
• Use Mode-3 cable only. Mode changing adaptors between charge point and vehicle are
not allowed according to international standardization
• homeCLU is not compliant with Mode-1 or Mode-2 charging
• eMH3 with RFID reader is not compatible with homeCLU
