DEEP TREKKER DTG2 USER MANUAL
DEEP TREKKER INC.
34
Retrieving Video Footage
Your video files are stored on the SD memory card.
When you are ready to edit or retrieve them, you can
do so in two ways.
1)
Using a USB Cable to connect to a computer
2)
Use a card reader to retrieve the files
Your computer will detect the SD card so you can
browse through your files to rename, copy/paste,
delete, edit, etc.
Using the Infrared Remote Controller and Editing Settings
1.
Connect your Deep Trekker controller to the DVR & insert the memory card.
2.
Turn on the DVR before using the IR remote controller.
3.
Aim the IR Remote Controller at the sensor to control the device.
4.
Press Rec (2) on the IR remote to start recording and press (3) to stop recording.
5.
Press (3) again to return to the main menu page.
6.
Enter Record Settings (5) to turn on Motion Detect.
7.
Enter General Settings (4) to edit settings
8.
To turn off the DVR, press the Power button (1), this button will not turn on the DVR.
You can also tap on the touch screen icons to edit the settings