6. 9 Volt input / output
- Plug 9V power into one of these 9V jacks. 9V power
automatically comes out of the second 9 Volt jack. This is a 9 Volt jumper system.
DO NOT connect 9 Volt power into both jacks at the same time.
7. Loop 1 output
- Send signal into pedals, or send signal to other device.
8. Loop 2 output
- Send signal into pedals, or send signal to other device.
9. Auxiliary 9 Volt input / output
- The 9 Volt jacks are either an input or an
output. Only one 9 Volt power in is required to power the 2Xflr.
Usage for the Loop 2Xflr.
The following setups have various uses for the 2Xflr system. Firstly using the pedal as a
central part of your pedal board lets you turn on and off sections of your pedal board.
Especially if you have certain pedals you don’t use all the time. The 2Xflr pedal puts
direct bypass on any pedals in the loops. This means, no more running your signal
through that wah, distortion, tremolo, phaser, when you do not use them. The 2Xflr keeps
only your bare essentials in your signal chain when you perform. And at the touch of one
button add in any effects you like, or however you route your signal path.
Here are sample files of how to setup and use the 2Xflr system, and various switching
capabilities of the Loop 2Xflr pedal.
Summary of Contents for 2Xflr
Page 4: ......
