IM-Inst-RF300en v12.0
Dedrone
17
Integrate the RF-300 in your DroneTracker
1
Start your web-browser and enter the address of your Dedrone Cloud.
For an optimal use, Dedrone recommends Chrome or Firefox.
2
Log in the DroneTracker UI as an administrator or configurator.
3
Choose
OPTIONS
>
Site Configuration
.
4
Choose [
Add
] >
Register device.
The window
Register device
appears.
5
Enter the registration key of your sensor and choose [
OK
].
The RF-300 appears in the Site Explorer.
6
To sort the RF-300 in the Site Explorer, drag and drop the element to the desired position.
7
Choose [
Save changes
].
The window
Site Configuration
disappears.
8
Choose
OPTIONS
>
Map Editor
and choose the RF-300.
9
An accurate alignment of the sensor and configuration in the
DroneTracker are prerequisites for a good direction finding result.
If the sensor was aligned via a prominent landmark, drag and drop the sensor symbol to
the installed position and move the arrow to the chosen prominent landmark.
If the sensor was aligned via a GPS device, choose the element on the map and enter the
noted values in the fields
Latitude
,
Longitude
and
Azimuth
.
10
To lock the settings, choose the option
Lock settings
.
11
Choose [
Save changes
].
The window
Map Editor
disappears.
For further information consult chapter “First Steps” of the integrated online help in the
DroneTacker UI.
7.2 Integrate the RF-300 via Dedrone Cloud
Requirements:
RF-300 is installed
The power supply is working and the button at the RF-300 illuminates blue
RF-300 is connected to the Dedrone Cloud
The address of your Dedrone Cloud access is known (provided by Dedrone)
The registration key of the sensor is available (provided by Dedrone)
Procedure: