Deditec USB WATCHDOG STICK, Hardware Description

Page: 13 / 62

Hardware description | Seite 13
2.5.1.2. Connection via power supply
If the PC is not equipped with a Reset-Button, you have to reset the PC directly via
the power supply. Regard the form factor of your mainboard.
2.5.1.2.1. Connection via ATX-/BTX-Adapter cable
If the PC is not equipped with a Reset-Button, you have to reset the PC directly via
the power supply. Therefore, you have to disconnect the power supply plug from the
mainboard and connect this plug to the slot side of the "DEDITEC ATX20/24
Connection Cable" (optional accessory for the Watchdog-Stick). After this, connect
the plug of the "DEDITEC ATX20/24 Connection Cable" to your mainboard.
Connect the both lateral protruded wires with the 2. relay of the D-SUB-Slot-Card
(B)