Deditec ETH-RELAIS-8, Hardware Description

Page: 67 / 109

Software |
Seite 67
5.5. DELIB CLI (command-line interface)
In some programming languages (like PHP), you can't include DLLs, therefore is
an extra console command, which you can directly call out of the program (with
appropriate parameters). You can find this command after installation of the
DELIB
driverlibrary in the directory C:
\Programme\DEDITEC\DELIB\Programs\Console.
You can find the DELIB CLI Command for Windows after Installation of the
DELIB driverlibrary in the directory C:\Programme\DEDITEC\DELIB\programs\cli\
.
The DELIB CLI Command for Linux is located in the directory "/deditec-cli/,
after unzipping the ZIP-Archiv "delib-linux-cli".
Definition (Windows)
delib_cli command channel [value | unit ["nounit"] ]
Definition for USB-Module (Linux)
sudo delib-cli-usb command channel [value | unit ["nounit"] ]
Definition for RO-ETH-Module (Linux)
delib-cli-eth command channel [value | unit ["nounit"] ]
Note: The parameters are separated by spaces.
These commands and parameters are not case sensitive.
Parameter
command channel value unit nouni
t
di1 0, 1, 2, ...
-
hex
nouni
t
di8
0, 8, 16, ...
di16
di24
do1 0, 1, 2, ... 0/1 (1-bit command)
- -
do8
0, 8, 16, ...
8-bit value
(Bit 0 for channel 1, Bit
1 for channel 2, ...)
do16 16-bit value
do24 24-bit value
ai 0, 1, 2, ... - hex, volt, mA nouni