Deditec ETH-RELAIS-8, Hardware Description

Page: 15 / 109

Hardware description |
Seite 15
2.2.5. Outputs
2.2.5.1. Relay outputs
The relays are able to switch voltages up to 36V. The max. current is 1A at a
max. power of 15W.
Additionally, the relays provide a safe electrical isolation of the module to the
connected equipment.
2.2.5.2. Timeout protection
The timeout-protection gives the possibility to switch-off automatically the
outputs to prevent damage. This takes place, if in a predefined time frame any
communication with the module was possible. Reasons could be cable
disruption, PC-crash and so on. This way damage control, surcharge of
connected equipment and risk of accidents can be avoided.
2.2.5.3. Visual control of the outputs (depends of module)
The state of each output is directly signalized by a separate LED. This simplifies
to detect and rectify wiring errors, because the signals on the cables are directly
observable.