Deditec ETH-RELAIS-8 Hardware Description Download Page 26

Page: 26 / 109

Hardware |

Seite

3.2. DIP-Switches

Einige Einstellungen lassen sich einfach mit Hilfe von DIP Schaltern
konfigurieren. Es lassen sich die DHCP- und EEPROM-Einstellungen
konfigurieren.

Achtung

: Alle Änderungen an den DIP-Schaltern werden nur nach Trennung

und Wiederherstellung der Spannungsversorgung übernommen.

DIP
Schalter 1

Modus / Erklärung

DHCP ist aktiviert

Die Netzwerkseinstellungen (IP, Subnetzmaske, DNS-Domain
sowie Gateway) werden über einen DHCP-Server aus Ihrem
Netzwerk bezogen.

OFF

DHCP deaktiviert

Die Netzwerkseinstellungen (IP, Subnetzmaske, DNS-Domain
sowie Gateway) werden aus dem EEPROM des Moduls
verwendet.

Mithilfe des DELIB-Configuration-Utility können diese
Einstellungen bearbeitet und im EEPROM des Moduls
gespeichert werden.

Siehe Kapitel: DELIB-Configuration-Utility

Summary of Contents for ETH-RELAIS-8














































































































Search results

Summary of Contents for ETH-RELAIS-8

Reviews:

Deditec ETH-RELAIS-8, Hardware Description, Page: 26 / 109

Search results

Summary of Contents for ETH-RELAIS-8

Reviews: