Independant timer
The timer function can be used as an independant timer if required. Select a zone
not in use and select the Timer control “t” will flash. Using the timer keys “G” select
the time required “t” will become fixed and the countdown will begin.
Additional Functions and Safety Features
EN
Adjusting the factory preset levels
With the hob turned off, press and hold the preset to be adjusted, while pressing
the preset adjust to the required power level.
Preset one can be adjusted between level 1 -5 preset two between 6-10 preset
three between 11-15
No adjustment can be made to the boost function.
Timer Functions
Each zone of the appliance can be controlled by using the timer function to turn off
the zone after a set period of time.
Select the zone required and adjust the power as required. press the timer controls
“G” and using the “+” or “-”keys select the cooking time required. The appliance
will now count down the time and turn off as required. when the time remaining is
less than 1 minute the display will indicate seconds remaining. at the end of the
time a beep will indicate the end of cooking.
Pre Heat /
Heat up
Pre-heat / Heat up
This Function will preheat the contents of the pan to boiling temperature before reducing
to your selected power.
To select the function turn on the required zone then press the “-“on the power selection
keys, “HU” is shown on the display, Select the power level to be maintained after the initial
heat up ( this must be level 7 or above ). During the pre-heat phase the display will alter-
nate between the selected power level and “HU”, once the preheating is complete the dis-
play will revert to the power level only. This feature can be used in conjunction with the
timer functions. For example you can set the appliance to preheat a pan of pasta to a boil
reduce the pan to a simmer then time the entire cooking phase to ensure perfect results
every time.
6
