background image

Control Lock: 

can be activated to lock the control panel during the cooking

process. This will lock the controls set on the cooking zones but will allow the stop
key to function. This is activated in / deactivated in the same way as the child lock.

Additional Functions and Safety Features

EN

Electronic Power Monitor: 

prevents power surge and de-surge in the event of

electrical interference without loss of performance to the hob.

Clean lock

This function allows you to temporarily lock your hob while cleaning.  To activate
Clean lock your cooking hob must be turned off.
- Briefly press touchpad “I”. A beep sounds and an indicator appears.
- After a predefined time, the lock will automatically disengage. A beep sounds and
the indicator goes out.

MEMO

- Memorisation of a cooking

This function allows the hob to memorise and reproduce an entire cooking cycle.
NOTES -
-  In order to ensure accurate reproduction of the initial cooking the same cookware
should be used.
-  Each time this feature is used it erases any previous settings.

-  Preheating cannot be used with the MeMo.

-  If the hob is switched off, pressing the “MeMo” button will display any programmed settings    
To use 

MeMo

:

-- Select a cooking zone.
- Keep your finger on the touchpad “H”, until the indicator is illuminated, 
- Adjust the power during cooking in the normal way with touch pads “E” or “F” this can be adjusted up to
five times in any cooking cycle, allowing a minimum of 10 seconds for each power level change to register
(if the number of settings exceeds 5 “NO” will be displayed on the display)  
To save the setting at the end of cooking press the touchpad of the corresponding zone. 
To reproduce the cooking the same zone used in the initial cooking must be selected followed by “MeMo”
(“NO” will be displayed if a different zone is selected).  The programmed power levels will be displayed in
sequence followed by the start of cooking.  

MeMo

Child Lock: 

for added peace of mind, the child lock can be manually activated to

prevent accidental start-up.
To activate the lock pres the “I” key and hold until a beep is sounded and an indica-
tor appears.
To de-activate hold the “I” key until the indicator goes out and a beep sounds.

5

Summary of Contents for DTi705
















Reviews: