61
➡
If ever the spark generators
get dirty, clean them with a stiff
non-metallic brush.
➡
The gas injectors are in the
centre of each burner in the
form of a "pot". Make sure not
to block them up partially when
cleaning the hob, as this will
considerably reduce the perfor-
mance of your gas-rings.
If a crack should appear in the glass top, immediately disconnect the appliance from
its power supply to avoid electric shock, and contact the After Sales Service.
- It is better to wash the parts of your hob by hand rather than in a dishwasher.
- Never use an abrasive sponge for cleaning your hob.
- Do not use a steam cleaner.
thermocouple
Nut
Injector
Sparker
ACCESSORIES TO
BE USED
✓
Small hard-bristled brush.
✓
Non-abrasive cream.
✓
Household sponge.
Keeping your hob in good condition is easy if you clean it
before it is completely cold
.
Even so, never clean it when it is in use. Set all the control knobs at zero.
HOW TO PROCEED
➤
➤
Looking after
the spark gene-
rators and injec-
tors
➡
Use a non-abrasive cream
for removing any persistent
stains. Then rinse with clean
water. Dry each burner ele-
ment carefully before
re-lighting your hob.
➤
➤
Looking after
the pan supports
and gas burners
✓
Household sponge.
✓
Special ceramic glass pro-
ducts E.g. Cera-Clen.
➡
Clean it with hot water, then
wipe dry. Use special ceramic
glass cleaning products for any
persistent stains.
➤
➤
Looking after
the glass top
Looking after your hob?
