3. Confirm by pressing the
key.
The name of the circuit and the heating water temperature set
point are displayed alternately.
4. Access setting of the heating water temperature set point by press
ing the
key.
5. Set the heating water temperature set point by pressing the or
key.
6. Confirm the new temperature set point by pressing the
key.
Note
Press the
h
key to cancel all input.
Note
The setting for the room temperature set point in comfort mode
can also be accessed in the User menu, parameter .
6.2.3
Setting the domestic hot water temperature
Note
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
1. Access the domestic hot water production parameters by pressing
the
key .
2. Modify the domestic hot water set point by pressing the or key.
Note
Press the
h
key to cancel all input.
3. Confirm the new temperature set point by pressing the
key.
Go back to the main display by pressing the
h
key.
6.2.4
Activating Forcing of the cooling function
Note
The cooling function can be managed via the PROG COOL sub-
menu dedicated to timer programming.
Note
The flow temperature set point for the cooling mode corresponds
to the parameters or depending on the
type of circuit configured (underfloor heating, convection fan). The
parameters or are available in the In
staller menu.
1. Access Forcing of the cooling function by pressing the
key.
Important
Forcing of the cooling function is possible only if the Installer ena
bled the cooling function during Installation.
Fig.35
MW-3000249-4
Fig.36
MW-6000254-2
Fig.37
MW-5000401-2
6 Settings
40
MIV-4
7623755 - v05 - 27042017