Dedicated Micros ©2008
ANPR
Camera Care
In order to avoid damaging your camera, note the following points:
CAUTION
• Service the camera in a clean, dry, dust-free environment.
• Remove all packaging inserts and any protective film from the camera before use.
• Installation should be made by a qualified service person and should conform to all local codes.
• Do not touch the image surface of the sensor. If the sensor is accidentally touched, only clean it
using isopropanol.
• To reduce a risk of unit failure, fire or electric shock, do not expose the interior of this product to
rain or moisture.
CE NOTICE (EUROPEAN UNION).
Marking by the symbol CE indicates compliance of this DM product to the Electromagnetic
Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EEC of the European
Union. Such marking is indicative that this system meets the following technical standards.
• EN 61000-6-3 EMC Standard Residential, Commercial and Light Industry.
• EN 61000-3-3 Limitations of voltage changes, fluctuations and flicker in public low-voltage supply
systems for equipment with rated current up to 16A.
• EN 61000-3-2 Limits for harmonic current emissions for equipment with rated current up to 16A.
• EN 50130-4 Immunity requirements for components of fire, intruder and social alarm systems.
• EN 60950 Safety of IT and related equipment.
• EN 55022 Class B. Radiated Emissions Standard, suitable for Commercial or Residential use.
• EN 60825-1 Safety standard for LED’s and Lasers.
Further details about these applicable standards can be obtained from Dedicated Micros Ltd. 1200
Daresbury Park, Daresbury, Cheshire, WA44HS.
A “Declaration of Conformity” with all relevant European Union Directives has been made, is on file
and is available from the Dedicated Micros address above.
This product is marked with the CE symbol and indicates compliance with all applicable directives.
Directive 89/336/EEC.
A “Declaration of Conformity” is held at Dedicated Micros Ltd., 1200 Daresbury Park, Daresbury,
Cheshire, WA44HS.
