Dedicated Micros ©2008
ANPR
• Type ‘upgrade a:\c1cp_app.zip’. This will install the firmware upgrade.
CW0>upgrade a:\c1cp_app.zip
Creating KB RAM disk
Formatting RAM disk B
Unzipping a:\c1cp_app.ZIP...
Archive: a:\c1cp_app.ZIP
inflating: C1CP_APP.ELF
Unzipped
Application b:\c1cp_app.elf found
Flashing application
FLASH: Finished storing main application
FLASH: No errors during verify
Reset the Camera (using the web pages) to complete the upgrade.
To upgrade bootloader
The software upgrade file will download in the format c1cp_boot.elf_xx.x_xxx.zip (where x is version
number). Rename this file to c1cp_boot.zip. in either windows or using ‘ren’ in the command line,
To ftp bootloader from the DOS prompt.
• Copy c1cp_boot.zip onto a location on the PC (eg. c:\hypersense)
• In Windows, click on Start -> Run... and type cmd in the dialog box that opens, then click ‘OK’.
• This opens up a dos window.
• Type ‘cd\’ to get to the c:\ prompt
• Type ‘cd c:\hypersense (or insert the local folder holding the downloaded files).
• Type ‘dir’. The zip file should be displayed.
• Type ‘ftp <ipaddress>’ replacing <ipaddress> with the ip address of the unit.
• Type ‘dmftp’ at the username prompt.
• Type ‘ftp’ at the password prompt.
• Type ‘put c1cp_boot.zip’. This will copy the file to the camera.
• Type ‘flashelf a:\c1cp_boot.zip
flashelf a:\c1cp_boot.zip
FLASH: ELF is now programmed
Note:
It may be necessary to increase the ramdisk size if upgrading from early versions of
software.
To increase Ramdisk
• Type ‘telnet <ipaddress>’ replacing <ipaddress> with the ip address of the unit.
• Type ‘svars ramdisk_size 1152’
svars ramdisk_size 1152’
• Type ‘writeform \flash\sys_vars.sfm’
writeform \flash\sys_vars.sfm’
Reset the Camera (using the web pages) to complete the procedure.
Default Passwords
Webpages,
Username: dm
Password: web
Telnet
Username: dm
Password: telnet
FTP
Username: dmftp
Password: ftp
