Dedicated Micros ©2008
ANPR
Appendix A
Upgrading Software
To upgrade webpages
Download the new files required from the Dedicated Micros website and save them in a folder on the
hard drive of the PC. These can then be transferred using ftp to the camera.
To ftp webpages from the DOS prompt.
• Copy the ‘web.zip’ and ‘web2.zip’ files to a location on the PC (eg. c:\hypersense)
• In Windows, click on Start -> Run... and type cmd in the dialog box that opens, then click ‘OK’. This
opens up a dos window.
• Type ‘cd\’ to get to the c:\ prompt
• Type ‘cd c:\hypersense (or insert the local folder holding the downloaded files).
• Type ‘dir’. Both zip files should be displayed.
• Type ‘ftp <ipaddress>’ replacing <ipaddress> with the ip address of the unit.
• Type ‘dmftp’ at the username prompt.
• Type ‘ftp’ at the password prompt.
• Type ‘put web.zip’.
• Type ‘put web2.zip’.
• Type ‘quit’.
To telnet to the camera
• Type ‘telnet <ipaddress>’ replacing <ipaddress> with the ip address of the unit.
From the same dos prompt
• Type ‘dm’ at the username prompt.
dm’ at the username prompt.
’ at the username prompt.
• Type ‘telnet’ at the password prompt.
telnet’ at the password prompt.
’ at the password prompt.
• Type ‘devcopy a:\web.zip \flash\web.zip’.
devcopy a:\web.zip \flash\web.zip’.
• Type ‘CW0>devcopy a:\web.zip \flash\web.zip’.
CW0>devcopy a:\web.zip \flash\web.zip’.
• Type ‘devcopy a:\web2.zip \flash\web2.zip’.
• Type ‘CW0>devcopy a:\web2.zip \flash\web2.zip’.
The unit will respond with ‘Copy complete’ when it has finished.
This will copy the web pages to flash. Reset the Camera (using the web pages) to complete the
upgrade.
To upgrade firmware
To ftp firmware from the DOS prompt.
• Copy c1cp_app.zip onto a location on the PC (eg. c:\hypersense)
• In Windows, click on Start -> Run... and type cmd in the dialog box that opens, then click ‘OK’.
• This opens up a dos window.
• Type ‘cd\’ to get to the c:\ prompt
• Type ‘cd c:\hypersense (or insert the local folder holding the downloaded files).
• Type ‘dir’. The zip file should be displayed.
• Type ‘ftp <ipaddress>’ replacing <ipaddress> with the ip address of the unit.
• Type ‘dmftp’ at the username prompt.
• Type ‘ftp’ at the password prompt.
• Type ‘put c1cp_app.zip’. This will copy the file to the camera.
