Dedicated Micros Dennard 2025, Installation Manual

Page: 18 / 100

15. Spares Parts and Accessories
16. Troubleshooting
WARNINGS
Disconnect from mains before removing the cover
If this unit shows signs of damage or malfunction, disconnect from mains immediately and contact
Dedicated Micros.
• In dark conditions you will be able to see a faint red glow from the LEDs. In daylight you will not
see anything at all unless you look at the lamp with a camera.
• Check mains supply is connected correctly and switched on. Supply should be 100-240V ~.
• Check polarity of connections to lamp.
• Check the photocell function (put opaque tape over photocell) and wait for a few seconds to see
if the product switches on.
• Check the 2A and 10A fuses inside the PSU and replace if necessary.
• Disconnect all control devices and switch all switches in the switch bank to the off position, to
check if the lamp illuminates.
Dennard 2025 Installation Manual Page. 16
Part no. Description
Dennard 95083 Replacement power supply unit
Dennard 95084 Replacement illuminator unit 850nm/30 degree angle
Dennard 94032 Photocell extension kit – kit to allow photocell to be mounted remotely from
PSU
Dennard 95086 Replacement window
Dennard 95087 Replacement photocell