16
EN
G
WD30AL
CL
Deda Elementi wheels are available with Shimano® / Sram® 10-11 speed cassette
and Campagnolo® 10-11 speed cassette. Read and carefully follow the installation
instructions of the sprockets.
The rear wheel with Shimano® freehub body is supplied with a 1.50mm aluminum
spacer that is intended to be used with Shimano® /Sram® 10 speed cassette only.
Please don’t use 1.50mm spacer with 11 speed cassette.
Wheel Type
Freehub Cassette Compatibility
Shimano/Sram
Shimano 11v
Shimano 10v +
1.50mm spacer
Sram 10v +
1.50mm spacer
Campagnolo
Campagnolo 11v
Campagnolo 10v
-
WARNING:
Since specific tools and experience are necessary for proper
sprockets installation, in case of doubts it is recommended that the product be
installed by an official Deda Elementi dealer or a qualified bicycle technician.
An incorrect sprockets installation can cause serious accidents and injury for
the user.
WARNING:
Please make sure that wheel freehub body be compatible with
your sprockets cassette before proceed with the assembly. Failure to insure
compatibility between wheel and sprockets cassette can cause malfunction of
the bicycle drive train resulting in serious accident and injury for the user.
SPROCKETS INSTALLATION
Insert the quick release into hub so that the lever be on the non drive side of
the wheel and tighten the quick release nut slightly on the opposite side of
the lever. (Note: front quick release is shorter than rear)
Install the front and rear wheel respectively into the fork and frame drop-outs.
Tighten the quick release nut untill is in contact with the fork or frame drop-outs.
WHEELS INSTALLATION INSTRUCTIONS
