CP19
3
4. APPLICATIONS
Applicactions with projected cork, stippled-
finish paints or “gotele”, textile
coatings on medium-sized surfaces.
5. OPERATING MODES
The gun can work in two different modes:
a) Valve mode
In this mode, the air outlet through the needle only happens whenever the trigger is
pulled. It is the
default configuration
, and the gun leaves the factory with it.
To change from the Continuous Air Mode to the Valve Mode, follow these steps:
1) Disassemble the product regulator (
no.12
of the exploded view
) and take the spring
out (
no.13
of the exploded view
).
2) Insert an Allen key size 4 at the back of the needle, whose cap has an Allen groove
(
no.10
of the exploded view
).
3) Turn the Allen key clockwise to
tighten
the cap.
b) Continuous air mode
Tighten the cap
Turn clockwise
Loosen the cap
Turn
counterclockwise
